CoreX is a purpose-built industrial computed tomography (CT) system. Not for the laboratory. For the shop floor — where quality decisions actually matter.
Carosello CoreX benefits – 2
The Problem with Traditional Industrial CT
Industrial CT is one of the most powerful tools in non-destructive testing (NDT).
It reveals internal voids, cracks, assembly errors, and dimensional deviations that no surface measurement can detect.
But industrial CT has always meant the same thing: high investments, slow results, complex use and high maintenance costs.
Why is CoreX Different
Conventional systems use open-anode sources. They require costly annual maintenance and 20–30 minute scan cycles.
CoreX is different: it delivers actionable data in a matter of seconds directly in the production line.
A rotating closed-anode source delivers up to 2,400W. Scans complete in 20 to 30 seconds for rubber, plastic, and carbon fiber; 40 to 50 seconds for aluminium, magnesium, and titanium.
As for the X-ray source, zero maintenance required.
Large-pixel detectors maximize speed and signal-to-noise ratio simultaneously. No parameter setup. No specialist needed.
The top-loading design simplifies every operator’s interaction. Fast part placement, fast removal, minimal handling time.
The fully shielded enclosure requires no bunker and no controlled environment.
CoreX is installed directly on the production line. It fits where quality control actually happens.
Any shop-floor operator can load a part and get a full measurement report in one click.
CoreX is not a faster CT system. It is a different category of tool entirely.
Three Advantages Manufacturers Cannot Ignore
1. Faster Batch Changeovers
With CoreX on the line, operators can inspect the first parts of a new batch within minutes of changeover — no lab technician, no external dependency. The line goes back into production faster, recovering significant time across multiple shifts and format changes each week.
2. Zero-Defect Manufacturing
CoreX makes high-frequency or even 100% part inspection viable for the first time in most production environments.
Real-time process monitoring through the colour-coded interface means deviations are caught and corrected before non-conforming parts accumulate – delivering only good parts to the customer.
3. Affordable Quality Certification
In automotive, aerospace, and medical manufacturing, CT-backed inspection reports are an increasingly standard customer requirement.
CoreX generates professional documentation in seconds, at the point of production, at a fraction of the cost of outsourced CT scanning – a decisive advantage when competing for contracts in regulated sectors.
Read other recent instrumentation news: https://instrumentation.co.uk/category/news/
