New 4/20mA loop-powered flameproof indicators
The new Fluidwell PID ratio flow controller F124 for closed loop applications is now available in ATEX and non hazardous versions.BFi OPTiLAS Ltd, a leading supplier of a wide range of sensors, will be demonstrating the new MS9000 accelerometer from Colibrys.
It is an extra small, high end product dedicated to applications in the field of inertial sensing. With excellent long term bias stability and an integrated temperature sensor suitable for the harsh environment, this new generation of products comes in a LCC20 (8.9mm x 8.9mm) ceramic package, some three times smaller than current sensors and in ranges from ±2g to ±200g. These sensors can operate over extended temperature ranges, with just a few milli g bias stability guaranteed over the extended lifetime.
BFi OPTiLAS also represent OFS (A Furukawa Company) who specialize in Optical Fibers. We will be available to discuss their geophysical fibers for harsh environments which have been optimized for the downhole environment. They use a dual coating system, of carbon and PYROCOAT. The Carbon provides a hermetic seal to the glass surface at all temperatures and protects against hydrogen ingression at up to 125 degrees C. This dramatically extends the fiber lifetime by stopping water-activated crack growth. The PYROCOAT layer is high temperature polyimide (300 degrees C).
ATEX products new to Scottish process industry
Burkert Fluid Control Systems will have their innovative Type 8650 EExia valve system integrating Burkert’s pneumatic solenoid valves with Siemens’ ET200iSP I/O modules, for ATEX Zones 1 and 21 and to IEC-Ex. This concept simplifies the installation of these separate, complex I/O devices, leading to big reductions in design costs and commissioning.
Burkert’s Type 8643 I/O box will be there, which incorporates Foundation Fieldbus protocol and will be joined soon by Profibus PA.
Other products will display Burkert’s extensive hazardous and safe area technology, including hygienic conductivity and non-glass pH electrodes.
Win an ipod Touch
Caledonia Instrumentation is going to host a lucky draw at the stand within the exhibition. Those who leave their business card/ contact details at the stand for sales registration will be entered into a draw. At the end of the exhibition, Caledonia Instrumentation will announce the name of the lucky winner who will walk away with a sleek Apple I-pod Touch.
Caltest Instruments specialises in Power Instrumentation and Simulation. Products include both AC and DC Power Sources, AC and DC dynamic Electronic Loads, advanced Power Analysers, and Electrical Safety Testers/Analysers.
Pacific AC Power Sources can be customised to suit a variety of applications, including high voltage (1000V and above), or high current for specific test purposes, output power ranges from 500VA to 63kVA in a single cabinet, or 750kVA with multiple cabinets. Test capability includes custom waveforms, transient generation, wide frequency range, and new Test Manager software.
Voltech’s new PM6000 Super Power Analyser offers high speed simultaneous sampling on all channels (up to 6) and wide bandwidth with high (0.02%) accuracy and huge data storage capacity.
The new PM1000+ single phase Power Analyser provides many of the features in a smaller single phase format.
Cameron Measurement Systems are proud to feature the Scanner 2000 and will be demonstrating its ModWorX™ Pro Software at Stand 707.
The Scanner 2000 microEFM has met the challenge to deliver flow computer functionality at chart recorder prices. Low price, ultra-low power requirements, and the capacity to measure oil, gas and liquids simultaneously give the Scanner 2000 a competitive edge over other flow measurement devices on the market todayAll users will benefit from the Scanner 2000's ease of use. A three-button keypad allows operators to configure basic parameters from the front panel, without a computer.
All other parameters are easily configured using the ModWorX Pro software.
For further information visit: www.c-a-m.com/flo
On stand 501 Endress+Hauser will exhibit a range of instruments and solutions for the oil & gas industry. On display will be the Cerabar S range of pressure transmitters, suitable for harsh environments and meeting all the latest industry legislation and directives. Endress+Hauser will showcase the Promass 83F Coriolis mass flowmeter, the ideal meter for the oil & gas industry. For level measurement in offshore applications, Endress+Hauser's Levelflex M guided radar will be on display. ATEX-approved and with easy remote operation, this instrument meets the requirements of the industry in continuous level measurement and continuous measurement of interface levels. 
Eurotherm are pleased to be demonstrating their latest process automation and control solution offerings at Instrumentation Scotland. Including the T2550 Programmable Automation controller, which uses continuous analog, logic and sequential control combined with secure data recording at point of measurement, forming the basis of a complete distributed control and recording environment. Designed to maximize Return on Investment from your process including, Retort furnace, Glass Furnace, Fermentation process, Sterilisation, Freeze Dryer, Building Management systems & Environmental Monitoring systems, to name a few.
Optical strain gauges are unbeatable for sustained load tests HBM's optical strain gauges (SG) now have an improved fatigue life; 10 million load cycles at an alternating strain of ±3.000µm/m can be attained. This makes the sensors unbeatable compared with available alternatives when sustained loading is tested, for example, on fibre-reinforced plastics at high alternating strain.Optical strain gauges are particularly suitable for measurement in potentially explosive areas and on high-current and high-voltage components. The relative wavelength variation resulting from a mechanical strain is linear over a strain range of more than ±10.000 µm/m. Based on fibre Bragg gratings, several sensors can be arranged inside a single glass fibre to significantly reduce installation costs.
Hima-Sella has been designing and supplying safety-related control and automation systems to the Oil & Gas industry for over 30 years. Specialist applications include SIL 3/4, hardwired or programmable ESD, HIPPS, F&G as well as SCADA and process control solutions. FPAL and JQS approved.
New laser triangulation position sensor Ixthus Limited, the non-contacting position measurement specialist has launched a new laser triangulation sensor with a CANbus interface capable of fast 1 Mbits/s position feedback over a measurement range from 2 mm to 1000 mm, with a sampling rate up to 8KHz, linearity of +/- 0.1% and resolution to 0.01% of range. Aimed at high speed non-contact measurement of position, displacement, surface profile and vibration, the sensor is also perfect for rapid product sorting and sensing. 
New DNV Approved Marine HMI with Sun-Readable Display from MAC Solutions
Exhibited for the first time in Europe, a new HMI with a unique sun-readable touch screen display is launched for the marine and offshore sectors. The display completely removes glare and allows effective operation even in direct sunlight. This HMI joins an already full range of HMI, Monitors and Flat Panel PCs certified for marine and offshore use. Come and explore a comprehensive range of Ethernet-based data communication solutions for industry,
including the world-leading Kepware OPC Servers and utilities.
Also an innovative remote-access connectivity solution using encrypted ADSL, GPRS and Internet links.
PDS Instruments are a UK supplier of power sources and test instrumentation. California Instruments (manufacturers of AC and DC power sources) will be at the show with us to exhibit their capabilities in power for Aerospace, EMC and Oil Field applications. At Instrumentation Scotland & Offshore Systems we will also be exhibiting a wide range of equipment from many of the manufacturers that we represent including LeCroy oscilloscopes, Tabor waveform generators and Voltech power analysers. Other manufacturers represented include Argantix (DC power), ETPS (DC power), NEC (data acquisition systems), Rotek (calibrators), Voltech (transformer testers) and Wayne Kerr (impedance analysers).
The Ideal Solution for Your Industry
The main highlight of the Rhopoint Components stand will be the new range of of pressure instrumentation manufactured by Paine Electronics.
Since the previous show, Variohm have introduced a wide range of products which are approved for Offshore Applications, such as:-
Headquartered in Europe - with design and manufacturing facilities in Aberdeen, Stavanger, and Houston - Ziebel also has additional service and support operations in the Middle East, Far East and South America.
